How to Fix a Squeaky or Creaky Stealth Chair
Share
A chair that squeaks every time you lean into the console is more than annoying — in a studio, a booth, or a quiet house of worship, it can end up on the recording. The good news: a squeak or creak almost never means something is broken. In most cases it's two metal parts rubbing together, and it takes a few minutes and a can of lubricant to fix.
Quick take
- Find the noise first: rock, swivel, lean back, and lean on the arms to see which motion makes it.
- The fix: lubricate all metal-on-metal contact points with a silicone-based lubricant, then wipe off the excess.
- Still noisy, wobbly, or worn? Every Stealth part is replaceable, and the 5-year warranty covers all parts against manufacturing defects.
Step 1: Find Where the Noise Is Coming From
Before you grab the lubricant, spend a minute pinning down which movement makes the sound. Sit in the chair and try each of these one at a time:
- Rock forward and back. A squeak that follows the forward-lean or recline motion usually points to the tilt mechanism under the seat.
- Swivel side to side. A noise when you turn points to where the cylinder meets the base and the mechanism.
- Lean on each armrest. A creak when you put weight on an arm points to the arm brackets.
- Roll the chair. A squeak while rolling points to the caster stems.
Narrowing it down means you treat the right spot instead of spraying the whole chair.
Step 2: Lubricate the Metal-on-Metal Contact Points
Lubricate all metal-on-metal contact points with a silicone-based lubricant. A spray with a thin straw nozzle makes it easy to get into tight spots under the seat.
- Apply a small amount directly where the metal parts meet.
- Work the part through its full motion a few times — rock, swivel, or roll — so the lubricant spreads into the joint.
- Wipe off any excess with a clean rag, and keep lubricant off the seat, backrest, and armrest pads.
- Sit back down and repeat the movement that made the noise. If it's quieter but not gone, give that spot one more light application.
Where to Look
| When it squeaks | Where to lubricate |
|---|---|
| Rocking or reclining | Tilt mechanism pivots under the seat |
| Swiveling | Where the cylinder meets the base and the mechanism |
| Leaning on an armrest | Arm brackets where they attach to the seat |
| Rolling | Caster stems where they seat into the base |
A squeak is almost never a broken chair. It's two metal parts asking for a little lubricant.
When It's More Than a Squeak
If the noise comes back right away, or the chair feels loose, wobbly, or sinks when you sit, that's usually a worn part rather than a dry joint. Every part on a Stealth chair is replaceable:
- Use Fix My Chair to match your symptom to the right part.
- Follow our step-by-step repair videos.
- Browse replacement parts for every Stealth chair.
Every Stealth chair is backed by a 5-year warranty that covers all parts against manufacturing defects. There's nothing to register — just keep your order confirmation as your proof of purchase. If you're not sure whether it's a warranty issue, call us at (303) 693-1104 or send us a message and a real person will help you sort it out.
Frequently Asked Questions
Why does my chair squeak?
Almost always it's two metal parts rubbing together, not a broken chair.
What lubricant should I use?
Use a silicone-based lubricant on the metal-on-metal contact points, then wipe off the excess.
Is a squeak covered under warranty?
The 5-year warranty covers all parts against manufacturing defects. If a squeak doesn't go away or a part feels loose, contact us and we'll help.
Need a part or a hand?
Every part on a Stealth chair is replaceable.
Shop Replacement Parts Contact Support