24/7 Control Room Chairs: Seating for Shift Work That Never Stops

Some rooms never go dark. 911 dispatch centers, security operations centers, network operations centers, utility and transportation control rooms all run around the clock, and the work doesn't slow down because it's 3 a.m. Operators sit facing a wall of screens for an entire shift. Then the next shift sits down in the same chair, and the one after that.

That puts a kind of pressure on seating that most offices never see. A chair in a 24/7 room is in use nearly every hour of the year, by people of every height and build, through the quiet stretches and the moments when everything happens at once. It has to support focused work, adjust in seconds, and keep going for years.

Where the Work Happens

The Lean That Matters Most

Much of a control room shift is steady monitoring. But the moments that define the job, a priority call coming in, an alert firing, a system going down, pull operators forward toward the screens. They lean in, focus, and stay there until the situation is handled. That's exactly when a typical office chair stops helping. Its backrest is designed for upright sitting and recline, so in the forward position the operator's lower back is on its own, right when stress and concentration are highest.

Stealth's patented ZenWave seat pivots as you lean forward, keeping your lower back in its natural curve. The Free-Float backrest stays in contact as you move between the console and the screens, and follows you back when the shift settles down again. Support doesn't disappear at the exact moment you need it.

One Chair, Every Shift

A dispatch console might seat four or five different people over a week. If adjusting the chair is slow or confusing, operators simply don't do it, and they spend the shift in someone else's settings. Quick, simple adjustments matter more here than almost anywhere else.

• Two piston heights included. A desk height and a taller height for raised consoles. Add the X-Tall cylinder for standing-height positions.
• Tool-free 4D arms. Adjust height, width and angle, or take them off entirely.
• Adjustable footring. The footring supports shorter operators at raised or sit-stand consoles.
• Room for every operator. Every model is rated for 400 lbs, with a larger-seat Pro for taller and bigger operators.

For a shared seat, size for your largest regular operator. That usually means the Stealth Pro. Our Standard vs. Pro guide covers the details.

Serviceable, Not Disposable

A chair used around the clock does the work of several chairs in an ordinary office. Cylinders and casters wear faster, and in many facilities a worn chair simply gets replaced. With Stealth, every part, from cylinders and casters to arms and backrests, is kept in stock and replaceable. A sinking seat or a worn caster becomes a quick part swap, with step-by-step help on our How to Repair page.

Every model is backed by a 5-year warranty covering all parts against manufacturing defects. For a facility budgeting seating across years of continuous use, that matters as much as comfort on day one.

Outfitting a Dispatch Floor or Operations Center?

If you're seating a dispatch floor, an operations center or several facilities, talk to us before you order. Our team can help you plan sizes and heights for your operators and answer your questions. Call (303) 693-1104 or send us a message.